The 2-Minute Pre-Ride Bike Safety Check
The ABC check every rider should know.
Before you start
- Difficulty
- Beginner
- Estimated time
- 2 min
- •Floor pump with gauge
- •If anything feels loose or brakes feel soft, do not ride until it is fixed.
Tools required
Safety
Most roadside problems give a warning before the ride. A short, consistent routine catches loose parts, soft tires and worn brakes while you are still at home.
A is for air
Check tire pressure with a gauge and inflate within the range printed on the tire. Look for cuts, bulges or embedded glass.
B is for brakes
Squeeze both levers. They should feel firm and stop well before touching the handlebar. Roll the bike forward and check each brake stops the wheel.
C is for chain and cranks
Spin the cranks backwards. The chain should run quietly. Grab both crank arms and push side to side to feel for play in the bottom bracket.
Quick releases and thru-axles
Check both wheels are secured and quick-release levers are fully closed. A wheel that comes out while riding is dangerous.
Final check
- Lift the bike a few centimetres and drop it: listen for rattles.
- Check the handlebar is straight and tight.
- Make sure lights are charged if you might ride after dark.
The weekly check
Once a week, or every few rides, go a little further than the pre-ride check:
- Wipe the chain and re-lube if dry.
- Inspect tires for cuts and embedded debris.
- Check brake pad wear.
- Check that key bolts (stem, handlebar, seatpost, bottle cages) are secure.
- Spin each wheel and look for wobbles or brake rub.
Frequently asked questions
What should I do if the brakes feel soft before a ride?
Do not ride. Check pad wear and cable tension on mechanical brakes; on hydraulic brakes, a soft lever may need a bleed. See a mechanic if you are unsure.
How often should I check tire pressure?
Before every ride. Tires lose air gradually, and lightweight inner tubes and tubeless setups can lose it faster.
The Medell. Letter
New rides, workshop guides and reviews, in your inbox.
Free. Every two weeks, never daily. One-click unsubscribe. See our privacy policy.
Keep reading
How to Wash Your Bike (Without Damaging It)
Road grime and rain wear parts out fast. A safe, step-by-step bike washing routine that protects bearings, brakes and the drivetrain.
How to Check and Adjust a Loose Headset
A clunk when you brake or a wobble in the steering often means a loose headset. How to check for play and adjust a threadless headset.
How to Fix a Squeaky, Clicking or Creaking Bike
Squeaks, clicks and creaks usually point to a handful of causes. A troubleshooting guide to the most common bike noises and how to fix them.