Skip to content

How to Clean and Lube a Bicycle Chain

The twenty-minute job that makes every other ride better.

By Medell. Editorial3 min read
Close-up of a bicycle chain and rear cassette
Glenn Carstens-Peters / Unsplash

Before you start

Difficulty
Beginner
Estimated time
20 min

Tools required

  • •Chain degreaser or citrus cleaner
  • •Stiff brush or chain-cleaning tool
  • •Clean, lint-free rags
  • •Chain lube suited to your conditions
  • •Chain wear checker (optional)
  • •Gloves

Safety

  • •Keep degreaser away from disc brake rotors and pads.
  • •Work in a ventilated space and dispose of used degreaser responsibly.

Dirt mixed with old lubricant forms a grinding paste that accelerates wear across the whole drivetrain. Cleaning and re-lubing the chain regularly is one of the most cost-effective things you can do for your bike.

Step by step

  1. 01

    Check chain wear first

    Use a chain checker. If the chain is worn past the manufacturer's limit, replace it instead, cleaning a worn chain will not restore it.

  2. 02

    Apply degreaser

    Shift to a middle gear. Apply degreaser along the chain while backpedalling, or use a chain-cleaning tool filled with cleaner.

  3. 03

    Scrub

    Brush the chain, cassette and chainrings. Pay attention to the jockey wheels on the rear derailleur, which collect a lot of grime.

  4. 04

    Rinse and dry

    Rinse with water at low pressure, then dry thoroughly with a rag. Let it air-dry completely; lube does not bond well to a wet chain.

  5. 05

    Lubricate

    Apply one drop of lube to each roller on the inside of the chain while slowly backpedalling.

  6. 06

    Wipe off the excess

    Wait a few minutes, then wipe the outside of the chain firmly. Lube belongs inside the rollers, not on the outer plates where it attracts dirt.

Wet or dry lube?

ConditionSuggested lubeNotes
Dry, dusty roadsDry lubeAttracts less dirt; reapply more often
Rain and wet roadsWet lubeResists wash-off; clean more thoroughly
Mixed conditionsAll-round or wax-basedFollow the product instructions

Whichever you use, a clean chain with a little lube always beats a dirty chain with a lot.

How often should you clean and lube?

There is no fixed schedule; conditions matter more than distance. A useful rule: lube when the chain looks dry or starts to sound noisy, and clean it whenever it looks black and gritty. After any ride in the rain, dry the chain and re-lube it the same day to prevent surface rust.

Frequently asked questions

Can I use WD-40 as chain lube?

The classic WD-40 spray is mainly a water displacer and cleaner, not a long-lasting chain lubricant. It can help remove water and grime, but follow it with a proper bicycle chain lube.

Do I need to remove the chain to clean it?

No. A brush and degreaser, or a clip-on chain-cleaning tool, works with the chain on the bike. Removing it is only worth doing for a deep clean or waxing, and requires a quick link.

Does a new chain need lubing?

New chains come with factory grease inside the rollers, which is a good lubricant. Many riders simply ride a new chain until it starts to look dry, then begin their normal lube routine.

Up next · 2 min readHow to Check Chain Wear and Know When to Replace Your Chain →

The Medell. Letter

New rides, workshop guides and reviews, in your inbox.

Free. Every two weeks, never daily. One-click unsubscribe. See our privacy policy.

Drivetrain

How to Adjust a Front Derailleur

Chain dropping or not reaching the big ring? A step-by-step guide to setting front derailleur height, angle, limits and cable tension.

Intermediate30 min job

The Medell. Letter · Free

Free. Every two weeks, never daily. One-click unsubscribe. See our privacy policy.

  1. 01One workshop fixA repair you can do this weekend, with tools and time listed.
  2. 02One road worth ridingRoutes and rides from around the islands.
  3. 03Gear notes, honestly labelledHands-on or research-based, always said up front.